Instructional Videos

WATCH SOME INSTRUCTIONAL VIDEOS BELOW TO LEARN A FEW TIPS AND TRICKS ABOUT YOUR OREGROWN SPECTRUM

Replacing Cartridges

First, attach your Oregrown cartridge to your Spectrum battery and twist into place, making sure not to over tighten.

To remove and replace or re-attach the cartridge, simply twist the cartridge until it releases from the battery.

You are now ready to use your Oregrown Spectrum. We recommend using our custom Oregrown designed battery.

Turning On and Off

Once your Oregrown cartridge is attached to your Spectrum battery, you are ready to go.

Click five times to turn it on.

Click five times again to turn it off.

Temperature and Session Mode

Changing the Temperature and Using Session Mode with your Oregrown Spectrum Once your Oregrown Spectrum in use, click three times to change the temperature.

Red is the hottest temperature setting with a 4.2V output. Blue is the medium temperature setting with a 3.4V output. Green is the lowest temperature setting with a 2.7V output.

Again, that’s three clicks to change temperature. To enter session mode, simply click twice and the lights will cycle on their own—this setting engages the battery for session mode.

To turn session mode off, simply click once.

Making Sure to Not Overtighten

Now that you have your Oregrown Spectrum in use, be sure to not overtighten the cartridge when attaching them to the battery.

If this is to occur, you will see a flashing blue light.

To fix the issue, simply do a quarter turn to loosen the cartridge and the Spectrum will work properly.

Featured Flavors